• LCD support: Up to 1920x1200, 10 bit
• Panel connectivity: LVDS
• Inputs:
2 x HDMI: 1 x connector, 2 x header
1 x DVI: 1 x connector
1 x VGA: 1 x connector, 1 x header
2 x Composite: 1 x connector, 1 x header
1 x Component: 1 x header
• Integrated MP4 media player / failover
• Separate power in for high power panels
• RS-232 control
• Part number: 4176001xx-3.
The HSP-1920 is a version of the SP-1920 for harsher environments. Designed for video signals up to 1920x1200 and LCD panel resolutions up to 1920x1200 with LVDS connectivity. The HSP-1920 meets the needs of many applications but is likely to appeal most to the Digital Signage market given the built-in MP4 fail-over media player, and the legacy industrial market for its Composite video input. The HSP-1920 is supported by a wide selection of panel connection cables and other accessories together with system development documentation including 3D drawings.
Panel Connectivity |
Panel connection: LVDS (Single/Dual channel) Panel resolutions - standard: 1920x1200, 1920x1080 Colors: Up to 10 bit per color (ie 1.06 billion colors) Panel Power: Support for 3.3V, 5V, 10V, 12V, 18V (note, separate power input for high power LCD panels) Backlight brightness control: DPMS enable pin (3.3v or 5v), Analog or PWM brightness control via serial port controller |
Input: HDMI 1.4 (1xconnector, 2xheader) |
60Hz up to 1920x1200 75Hz up to 1600x1200 480p, 576p, 720p, 1080i, 1080p |
Input: DVI (1xconnector) |
60Hz up to 1920x1200 75Hz up to 1600x1200 |
Input: ARGB (VGA) (1xconnector, 1xheader) |
60Hz up to 1920x1200 75Hz up to 1600x1200 |
Input: Composite (1xconnector, 1xheader) |
PAL, NTSC |
Input: Component (1xheader) |
PAL, NTSC 480p, 576p, 720p, 1080i, 1080p |
Function Interface | On Screen Display (OSD) Menu |
Function Controls | External buttons, Infra-Red controls, Serial Port (RS-232) control |
Functions | Basic: Brightness, Contrast, Color Temperature, Image positioning, Saturation, Hue, Sharpness, Black level
Additional: Input source select, Auto source seek, Auto picture setup, Auto color gain, Manual clock & phase, OSD timeout, OSD menu transparency, Image orientation, System Information, Image scaling Up/Down to fit input to panel resolution & aspect ratio. Gamma, Aspect/Size, Menu language (English, French, Spansih), OSD timeout, Programmable Hotkey 1&2, Auto power, Video standard, Volume, Load factory defaults. Special: USB media failover |
Audio | Digital audio line out (from header) with OSD volume control, not amplified |
Other |
Plug & Play: DDC 1.2/b compatible Conformal coating: HumiSeal IB73, acrylic, spray application EDID: Auto set to match the panel resolution Status indicators on board: Dual color or LED Power in: 12/24V DC |
Controller size | 179.1mm (connector side) x 120.4mm |
Reliability |
MTBF in excess of 100,000 hours @ 25oC (calculated using Telcordia SR-332 procedure) Warranty 3 years |
• Brochure (PDF)
• Manual v1.01 (PDF)
• Revision Note Dec 2020 (PDF)
Drawings
• 2D Drawing (PDF)
• 2D Drawing (DWG)
• 3D Drawing (SLDPRT)
Application Notes
• Firmware upgrade (U3)
Statements & Declarations
• Statement of Volatility
• Compliance & declarations page
• USA: +1.408.782.7773
• UK: +44-(0)20-7631 2150
• HK: +852-2861 3615
Email: Please use the form below to
direct your enquiry to the nearest office.
For a full selection of LCD Controller accessories click here.